BTYWH - AH26 LIQUID (RESIN), 667002
- MSDS: BTYWH
- Manufacturer: CAULK DENTSPLY
- Product Name: AH26 LIQUID (RESIN), 667002
- National Stock Number: 6520-00N048746
Product Identification
Product ID:AH26 LIQUID (RESIN), 667002
MSDS Date:06/26/1992
FSC:6520
NIIN:00N048746
MSDS Number: BTYWH
Responsible Party
MILFORD, DE 19963-0359
US
Emergency Phone: 302-422-4511
Info Phone: 302-422-4511
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
BISPHENOL-A-EPOXY RESIN
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:IRRITATING. MAY CAUSE
SENSITIZATION BY CONTACT. EYES:IRRITATING.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:MOVE TO FRESH AIR. CONSULT MD. SKIN:WASH W/SOAP &
WATER. CONSULT MD IF IRRITATION OCCURS. EYE:RINSE IMMEDIATELY
W/PLENTY OF WATER FOR AT LEAST 15 MINUTES & SEEK MEDICAL ADVICE.
INGEST:FLUSH W/WT AER & CONSULT MD.
Fire Fighting
Flash Point:>392F,>200C
Extinguishing Media:FOAM, CO*2, DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Accidental Release
Spill Release Procedures:SCOOP UP & PLACE IN A LABELED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED GOGGLES .
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Vapor Density:1.5-1.2
Appearance and Odor:YELLOW HONEY-LIKE LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.